One Way Polyester Lifting Slings , Yellow Lifting Straps 3000KG
All our lifting slings and lifting straps are made of highly
durable, heavy-duty polyester webbing. These lifting slings
(sometimes called lifting straps) are in stock in numerous widths
and lengths. Slings come in various styles: flat eye and eye,
twisted eye, endless, and endless round to meet your specific
High quality fully certified Endless Flat Belt Webbing Slings are
manufactured to your requirements. Easy to use in many different
1,000kg sling width = 30mm PURPLE
2,000kg sling width = 60mm GREEN
3,000kg sling width = 90mm YELLOW
-For larger sizes please contact our friendly sales team who will
advise costs and lead times.
Flat Endless Polyester Webbing Slings of different capacitiy (SWL),
upon customer request, also with different safety factors and
width, individual labels and custom printing.
We can print your logo or your text on the sling.
Endless Slings are one of the most versatile and widely used
slings, they can be used in all three types of hitches. Sling life
is prolonged because of rotation of the wear surfaces.
We also manufacture webbing slings to DIN 60005 norm.
When using flat woven webbing slings always:
• Store and handle belt slings correctly.
• Inspect belt slings and accessories before use and before placing
• Follow safe slinging practices, as given overleaf.
• Position the bight for choke lift at 120° (natural angle).
• Position the sling so that the load is uniformly spread over its
width and protect the sling from sharp edges.
• Apply the correct mode factor for the slinging arrangement.
When using flat woven webbing slings never:
• Attempt to shorten, knot or tie belt slings.
• Expose belt slings to direct heat or flames.
• Use belt slings at temperatures above 80°C or below 0°C without
consulting the supplier.
• Expose belt slings to chemicals without consulting the supplier.
• Shock load belt slings.
• Use belt slings which are cut or which have loose or damaged
Polyester is resistant to moderate strength acids but is damaged by
alkalis; polyamide (Nylon) is virtually immune to
alkalis but is damaged by acids; and polypropylene is little
affected by acids or alkalis but is damaged by some
solvents, tars and paints.
The sling must be both long enough and strong enough for the load
and the slinging method. Apply the mode factor
for the slinging method. For use at temperatures exceeding 80°C or
below 0°C refer to the suppliers instructions. If
the slings are used in multi-leg arrangement the angle formed
between the legs should not be less than 30° or
greater than 90°. If abrasion, heat generated by friction or
cutting from edges or corners are likely, select a sling
fitted with protective sleeves and/or use suitable packing.
Using Belt Slings Safely
Do not attempt lifting operations unless you understand the use of
the equipment, the slinging procedures and the
mode factors to be applied. Do not use defective slings or accessories. Check the correct engagement with
and appliances, ensure smooth radii are formed, do not twist or cross
slings and do not overcrowd fittings. Position
the sling so that the load is uniformly spread over its width.
Position the bight for a choke lift at the natural (120°)
angle to prevent friction being generated. Ensure that stitching is
in the standing part of the sling away from hooks
and other fittings. Take the load steadily and avoid shock loads.
Do not leave suspended loads unattended. In an
emergency cordon off the area.
why choose us:
High Quality & Reasonable Price
Strict Management System
More than 23 years experience of OEM/ ODM service
Professional Pre-Sales Service & Satisfaction After-Sales